XStone XSolution Kit Etch Remover

XStone XSolution Kit is expertly designed for etch removal, providing a comprehensive solution to rejuvenate various surfaces. It includes abrasive pads for varying degrees of etch severity, XStone C1.CREAM to clear residues, XStone F5.12 liquid wax for enhanced shine, and XStone X.POLISH for a glossy finish. Complete with protective gloves and a high-quality paper cloth, this kit contains all the essentials for an efficient restoration process. It’s an ideal choice for both professional restorers and DIY enthusiasts seeking to revitalize etched, damaged, or dull surfaces with less effort and superior results.

Key Features:

  • Abrasive Pads: Tailored for different surface needs.
  • C1.CREAM: Effectively cleans stubborn residues.
  • F5.12 Liquid Wax: Delivers a polished shine.
  • X.POLISH: Ensures a high-gloss finish.
  • Simplified Restoration: Makes reviving surfaces straightforward.
  • All-Inclusive Kit: Ready to use with all essentials included.


Download XStone XSolution Kit Safety Data Sheet
Download XStone XSolution Kit Technical Data Sheet


• Marble
• Granite
• Natural Stone
• Beton/Cement


• Coverings
• Kitchen Benchtops
• Bathroom Benchtops
• Tables


For Smoothed Surfaces:

1. Use the BLACK TRIANGLE: Moisten the corrosion spot with a little water and gently scrub in circular motions for about a minute. If the water turns white, it indicates effective corrosion removal.

2. Rinse and dry the area thoroughly. Check against backlight for any remaining corrosion marks. If present, repeat the process with the BLACK TRIANGLE until all corrosion is removed.

3. For any remaining small marks or opacities, apply C1.CREAM. Use the WHITE SQUARE PAD to rub the cream into the area for about a minute, achieving a uniform finish.

For Polished Surfaces:

1. Follow the steps for smoothed surfaces initially.

2. Gradually increase the working area with successive triangles, starting with the BROWN TRIANGLE. Use minimal water and make circular motions for about a minute. Rinse and dry thoroughly.

3. Repeat the process with the GREEN TRIANGLE, then the YELLOW TRIANGLE, rinsing and drying after each.

4. To restore polish and uniformity, apply X.POLISH powder to the work area. Add a drop of water and use a clean WHITE SQUARE PAD to rub firmly.

5. For a mirror-like finish, apply F5.12 with a microfiber cloth over the entire surface, let it dry, then buff vigorously with a wool cloth.

Note: Throughout the process, use minimal water and ensure each step is followed by rinsing and thorough drying.